Help with GitFi
What is GitFi?
GitFi (gitfi.link) is a non-custodial app for swapping and bridging tokens across EVM networks and Solana. You review the route, the costs and the estimated amount, then confirm every transaction in your own wallet. GitFi never holds your funds, and it does not issue tokens.
How do I bridge to a new network like Robinhood Chain, MegaETH or Monad?
Open gitfi.link, choose the token you hold under Sell, pick the network under Buy, check the estimate, then confirm in your wallet. The full list of networks is on this page.
Does GitFi hold my funds?
No. Your wallet signs every transaction, and GitFi never has access to your keys.
What will I pay?
The route, the costs and the estimated amount you receive are shown before you sign.
Which site is official?
Only gitfi.link and x.com/GitFiLink. Do not connect your wallet to lookalike sites.
How GitFi works
- Connect your wallet.
- Pick the tokens and networks, then enter an amount.
- Review the route, the fees and the estimated amount.
- Confirm the transaction in your own wallet.
GitFi never holds your funds.
Supported networks
You can send from and receive on these networks. Networks marked Receive can only receive.
Solana
- Solana
EVM networks
- Base
- Robinhood Chain
- HyperEVM
- Arc
- Elysium
- Ethereum
- Arbitrum
- BNB
- Polygon
- Optimism
- MegaETH
- Monad
- Abstract
- ApeChain
- Avalanche
- Berachain
- BOB
- Boba Network
- Celo
- Cronos
- Doma
- Flow EVMReceive
- GensynReceive
- Gnosis
- Ink
- Katana
- Linea
- Manta Pacific
- Mantle
- Metis
- Mode
- Morph
- MythosReceive
- Plasma
- Plume
- Ronin
- Scroll
- ShapeReceive
- Somnia
- Soneium
- Sonic
- Stable
- Tempo
- Unichain
- World Chain
- X Layer
- Zircuit
- zkSync Era
- Zora
More networks are coming soon.
Getting started
Which wallets can I use?
Any wallet that adds itself to the page: a browser extension on a computer (EVM or Solana), or your wallet app's built-in browser on a phone.
- On a phone, open gitfi.link inside your wallet app (its browser tab), then connect there.
- "Connect wallet" only asks your wallet for permission to connect. There is no sign-in signature, and connecting moves nothing.
- Plain wallets and MetaMask smart accounts are supported. Contract wallets such as Safe are not, because the tokens arrive at the same address on the destination network.
- Every approval and every transfer is a separate transaction that your wallet shows you before you confirm it. GitFi waits up to 10 minutes for you to confirm.
- You can look at networks, tokens and prices before you connect. To get a quote for an amount, connect your wallet.
- The Disconnect option under your address in the top bar disconnects your wallet from GitFi. It is unavailable while a transfer step is in progress.
- Connecting a Solana wallet only asks for permission to connect. There is no sign-in signature.
Transfers
Which networks and tokens can I use?
EVM networks and Solana in both directions, with the networks and tokens listed in the swap form; you can send to almost any Solana token, and from Solana you can send SOL, USDC, USDT, PENGU, CASH, PYUSD, USDG and OUSD.
- Bitcoin, Tron and other non-EVM networks are not supported.
- Swapping other Solana tokens on the way comes later.
- CASH, PYUSD, USDG and OUSD let their issuer move or freeze any holder's balance (a permanent delegate). That is the issuer's power over the token, not GitFi's.
- When the tokens go to Solana, you paste the receiving Solana address; GitFi checks that it is a wallet address, not a program or token account.
- Sending from some listed networks is not available yet, because GitFi cannot check your wallet there; the swap form tells you when that happens.
- On a few newer networks GitFi cannot read token balances yet, so you can send only the network's own coin from them; tokens on those networks show "Insufficient Balance".
- Before your wallet opens, GitFi checks the tokens in the quote.
- It refuses a token whose identity it cannot verify, a token that uses look-alike characters to copy a well-known token's symbol, and tokens on its list of unsupported tokens (for example tokens that take a fee on every transfer).
- When GitFi refuses, no quote is made and nothing is sent.
How long does a transfer take?
Most transfers finish around the estimated time that the swap form shows for each quote.
- A busy network can make a transfer take longer.
- You can follow each transfer on the Transactions page.
What is Add Gas?
Add Gas puts about $2 of the receiving network's gas coin in your wallet, taken from what you receive, in the same transfer.
- The swap form offers it when your wallet holds less than $10 of that gas coin.
- It is offered only when you send to another network and receive a token, not the gas coin itself.
- It works only when you enter the amount to send.
- The review shows it as "Additional Gas". GitFi's fee does not change.
What does "outcome unknown" mean?
It means GitFi could not confirm whether your wallet sent the transaction.
- Do not send the same transfer again.
- First check your wallet's activity and the Transactions page.
- GitFi never sends a step again on its own.
- If it stays unclear, contact support with the transaction hash.
What does "Nothing was sent" mean?
It means GitFi stopped before your wallet sent anything, so no tokens left your wallet and no network fee was paid.
- GitFi checks every quote and every wallet step first; when a check fails, it stops and tells you why.
- The message ends with the next step, for example get a new quote or choose another token.
- You can safely start again: there is nothing to cancel and nothing to wait for.
- If your wallet already sent a step, GitFi says so instead and never sends it again on its own.
Why does GitFi sometimes say it cannot quote right now?
At busy times GitFi can get only a limited number of quotes each minute, so wait a moment and get a new quote; nothing is sent until you confirm in your wallet.
- GitFi cannot quote this swap right now. Nothing was sent. Wait a moment, then get a new quote.
What happens if a transfer fails?
If a transfer cannot be completed, the refund goes back to your connected wallet, or, if you sent to another address, it can go to that recipient on the receiving network.
- Every quote names your connected wallet as the refund address on the network you send from. When you send to another address, the route provider may refund on the receiving network to that recipient; the review shows this before you confirm.
- Refunds are made by the route provider. They can take some time and may be reduced by network costs.
- A refunded transfer shows "Refunded" on the Transactions page.
- A refund for a transfer from Solana goes back to the Solana wallet that sent it.
Approvals and safety
Why does my wallet ask for an approval?
Some tokens need your permission before they can be moved, and GitFi asks only for the exact amount of this transfer.
- The approval is for the exact amount, never an unlimited amount.
- The approval and the transfer are two separate transactions, each confirmed in your wallet.
- GitFi does not use permit signatures, batched transactions or account delegation (EIP-7702).
Are there limits?
GitFi sets no maximum amount, but it enforces a few rules in its code.
- Slippage of at most 5%.
- Approvals of the exact amount only.
- The tokens are sent to your connected wallet, or, if you choose, to another EVM address on a different network; the full address is shown before your wallet opens. A refund on the network you send from always goes back to your connected wallet.
- If you enter the amount to send, the quote must be for exactly that amount.
- If you enter the amount to receive, you receive at least that amount less your slippage, and the quote may be at most your slippage above it.
- A limit on how many quotes can be requested in a short time.
- The route provider may have a minimum or maximum amount for a route. The swap form tells you when an amount is outside it.
- If a quote would give you back more than 3.5% and at least $10 less than you send (in US dollars, fees included), the swap form shows a warning and the Swap button turns red. Check the amounts before you confirm.
Fees
What does GitFi charge?
GitFi charges a Website Fee: a percentage of the value you send, measured in US dollars when the quote is made.
- The rate depends on the type of transfer and its size (1 bps = 0.01%).
- Usually you enter the amount you send, and the rate applies to that value.
- If you enter the amount you want to receive instead, the route provider applies the rate to the value you receive. The rate itself is still chosen from the US-dollar value you send.
- The fee is part of the quote you confirm and is collected through the route provider's app-fee system, not as a separate charge.
- In the swap details this fee appears as App Fee.
- Routes and quotes come from Relay, an independent cross-chain provider. GitFi sets its own fee.
- The quote shows the costs before you sign; network gas is paid in your wallet.
| Transaction type | < $10,000 | $10,000 – < $100,000 | $100,000 – < $500,000 | ≥ $500,000 |
|---|---|---|---|---|
| Same-token Bridge | 5 bps | 4 bps | 3 bps | 2 bps |
| Stablecoin Swap | 5 bps | 4 bps | 3 bps | 2 bps |
| Major Token Swap | 10 bps | 8 bps | 6 bps | 5 bps |
| Minor / Altcoin Swap | 20 bps | 15 bps | 10 bps | 8 bps |
Same-token Bridge: the same token moved to another network, for example ETH on Ethereum to ETH on Arbitrum. Stablecoin and Major Token Swap: tokens verified in GitFi's token registry by network and contract address. Any other token is charged as Minor / Altcoin.
If GitFi cannot confirm the dollar value of your amount from two prices that agree within 2%, the first-column rate of the category applies. If you entered the amount to receive, GitFi makes no quote in that case.
Support
How do I contact support?
Email support@gitfi.link, or send a direct message to @GitFiLink on X.
- Send only public details: your wallet address, the network and the transaction hash.
- GitFi will never ask for your private key or recovery phrase.
- These are GitFi's only support channels; any other account or address that offers help in GitFi's name is not GitFi.